AllerSnap® - Allergen Prevention Surface Test

This instructional video demonstrates the proper use of AllerSnap®, Hygiena's allergen prevention test for verifying allergen removal from surfaces.

Key Steps:

1. Collection
   • Allow AllerSnap to reach room temperature before use.
   • Label the test with the location for easy identification.
   • Swab a 4x4 inch (10x10 cm) area in a crisscross pattern with even pressure to maximize sample collection.
   • Avoid touching the swab shaft to prevent contamination.
   • Rotate the swab tip for maximum sample collection, ensuring proper coverage on irregular surfaces.
2. Activation
   • Break the Snap-Valve by bending the bulb forward and backward.
   • Squeeze the bulb to release liquid into the tube.
   • Shake for 5 seconds to mix.
3. Incubation & Results
   • Incubate for 15 minutes at 55°C or 30 minutes at 37°C.
   • Compare the color of the liquid to the AllerSnap color chart:
     • Green = Clean (No allergens detected).
     • Purple = Potential allergens present.

Disposal

AllerSnap devices can be discarded in the recycling bin.